Fortinet FortiGate FortiGate-60 Administration Manual page 186

CLI configuration
186
Use this command to summarize external routes for redistribution into OSPF. This
command works only for summarizing external routes on an Autonomous System
Boundary Router (ASBR). For information on summarization between areas, see
"config range" on page
route, you reduce the size of the OSPF link-state database.
config summary-address command syntax pattern
config summary-address
edit <id_integer>
set <keyword> <variable>
end
config summary-address
edit <id_integer>>
unset <keyword>
end
config summary-address
delete <id_integer>
end
get router ospf
show router ospf
Note: Only the prefix keyword is required. All other keywords are optional.
summary-address command keywords and variables
Keywords and
variables
advertise
{disable | enable}
prefix
<address_ipv4mask>
tag <tag_integer>
Example
This example shows how to summarize routes using the prefix 10.0.0.0 255.0.0.0.
config router ospf
config summary-address
end
This example shows how to display the OSPF settings.
get router ospf
01-28006-0002-20041105
171. By replacing the LSAs for each route with one aggregate
Description
Advertise or suppress the summary route
that matches the specified prefix.
Enter the prefix (IP address and netmask)
to use for the summary route. The prefix
0.0.0.0 0.0.0.0 is not allowed.
Specify a tag for the summary route.
The valid range for tag_integer is 0 to
4294967295.
edit 5
set prefix 10.0.0.0 255.0.0.0
end
Router
Default Availability
All models.
enable
No All models.
default.
0 All models.
Fortinet Inc.