Tamper Protection - Bosch APC‑AMC2‑4WCF Installation Manual

34 en | Installing
4.16

Tamper Protection

To protect the AMC2-4W against unauthorized access and so prevent tampering with sensitive
data, the AMC2-4W provides an additional interface to connect external tamper contacts. This
interface is a potential-free 2-pin pluggable screw connector marked with T. When not in use
this tamper contact should be shorted.
Figure 4.23: Location of the tamper protection contact
2020-01 | V02 | Installation manual
Access Modular Controller 2
Bosch Security Systems B.V.