Tamper Protection - Bosch Access Modular Controller 2 Manual

Access Modular Controller 2
4.14

Tamper protection

To protect the AMC2 against unauthorized access and so prevent tampering with sensitive
data, the AMC2 provides an additional interface to connect external tamper contacts. This
interface is a potential-free 2-pin pluggable screw connector marked with T. When not in use
this tamper contact should be shorted.
Figure 4.24: Location of the tamper protection contact
Bosch Security Systems B.V.
Guide d'installation
Installing | en 33
2022-11 | V04 |