Table of Contents
Advertisement
DMX signal fail:
To access the DMX signal fail setting, press the "MENU" button to show "DMX Fail" on the OLED display.
Now use the "UP" and "DOWN" buttons to choose between "Hold", "Blackout" or "Auto".
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
LED refresh rate setting:
To access the LED refresh rate setting, press the "MENU" button to show "Frequency" on the OLED
display. Now use the "UP" and "DOWN" buttons to choose between "600Hz", "1200Hz", "2000Hz",
"4000Hz" or "25kHz". Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Colour mix mode:
To access the colour mix mode, press the "MENU" button to show "Colour Mix" on the OLED display.
Now use the "UP" and "DOWN" buttons to choose "Red". Press the "ENTER" button and use the "UP"
and "DOWN" buttons to select the brightness of Red between "000-255".
Value: 000 - 255 (000 = low, 255 = high).
Now press the "ENTER" button and repeat for "Green", "Blue" and "Amber".
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Built-in programs:
To access the built-in programs, press the "MENU" button to show "Program" on the OLED display.
Now use the "UP" and "DOWN" buttons to choose between "Static", "Fade" or "Auto".
Static - Press the "ENTER" button and use the "UP" and "DOWN" buttons to select between
"Colour: 1 - Colour: 25". Press the "ENTER" button and use the "UP" and "DOWN" buttons to select
between "Strobe: 0 - Strobe: 10".Press the "ENTER" button to confirm the setting.
Colour 1 - Red
Colour 2 - Green
Colour 3 - Blue
Colour 4 - Amber
Colour 5 - Cyan
Fade - Press the "ENTER" button and use the "UP" and "DOWN" buttons to select between
"Fade: 1 - Fade: 5". Press the "ENTER" button and use the "UP" and "DOWN" buttons to select
between "Speed: 1 - Speed: 9". Press the "ENTER" button to confirm the setting.
(1 = slow speed, 9 = fast speed).
Auto - Press the "ENTER" button and use the "UP" and "DOWN" buttons to select between
"Speed: 1 - Speed: 9". Press the "ENTER" button to confirm the setting.
(1 = slow speed, 9 = fast speed).
www.prolight.co.uk
Colour 6 - Magenta
Colour 7 - Yellow
Colour 8 - White
Colour 9 - Orange
Colour 10 - Lime Green
Operating instructions
Colour 11 - Lavender
Colour 12 - Yellow/Orange
Colour 13 - Pink
Colour 14 - Light Blue
Rapid QB1 RGBA IP User Manual
Colour 15 - Colour 25
- White colour
temperature macros
9
Advertisement
Table of Contents
