Table of Contents
Advertisement
Battery reference information:
When the battery charge indicator LED is illuminated red, the fixture is recharging.
When the battery charge indicator LED is illuminated yellow, the fixture has less than 30% charge.
When the battery charge indicator LED is illuminated green, the battery is charged.
The recharging time for the battery is 5 hours when the unit is powered off and 9 hours when the unit
is powered on.
The battery usage time from fully charged is dependant on the mode and brightness of the fixture.
For more information please see the features on page 3.
Remaining battery life:
The batteries remaining charge is displayed at the top right of the OLED screen throughout the menu.
Eco mode:
To access the eco mode setting, press the "MENU" button to show "Eco Mode" on the OLED display.
Now use the "UP" and "DOWN" buttons to choose between "On" or "Off".
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Please note: Eco mode allows the fixture to run longer from a single charge when used in a 3 or more
colour program with a slight reduction in intensity.
IR remote:
To access the IR remote setting,, press the "MENU" button to show "IR" on the OLED display.
Now use the "UP" and "DOWN" buttons to choose between "On" or "Off".
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Please note: The fixture must be set to Master for the IR function to work.
Menu lock:
The OLED display for this fixture has a menu locking function where after 5 seconds of inactivity
it will lock. To unlock the menu hold the "MENU" and "DOWN" buttons for 3 seconds.
To access the menu lock setting, press the "MENU" button to show "Menu Lock" on the OLED display.
Now use the "UP" and "DOWN" buttons to choose between "On" or "Off".
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Reset factory settings:
To access the factory reset setting, press the "MENU" button to show "Factory Reset" on the OLED
display. Now use the "UP" and "DOWN" buttons to choose between "Yes" or "No".
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
Operating instructions
Operating instructions
Rapid QB1 RGBA IP User Manual
11
Advertisement
Table of Contents
