Advertisement
Quick Links
Size: 210 x 148 mm (H x W)
*This page lists the manual revision history and
is for internal use only.
This drawing contains proprietary information and trade secrets of Furrion Property Holding Ltd.
1.0
12-Jan-22
REV.
DATE:
DATE:
12-Jan-22
NAME:
For Online Upload Only
Unauthorized use or copying is prohibited.
NEW
MODIFICATIONS:
Furrion Property Holding Ltd.
DRAWN BY:
Streng Shi
IM for Vision S+ Camera System
APPROVED BY:
Ricky Deng
Program: Indesign CC
Black
Streng Shi
NAME
REVISION:
1.0
PART NO.
IM-FCM00008
XX
ECN NO.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Furrion VISION S+
Summary of Contents for Furrion VISION S+
- Page 1 Size: 210 x 148 mm (H x W) *This page lists the manual revision history and is for internal use only. This drawing contains proprietary information and trade secrets of Furrion Property Holding Ltd. Unauthorized use or copying is prohibited. 12-Jan-22 Streng Shi REV.
- Page 2 VISION S+ CAMERA SYSTEM MODEL: FOS7HTAEM, FOS7HTAEN, FOS7HTAPM, FOS7HTASF FOS7HTASM, FOS5HTAEM, FOS5HTAEN, FOS5HTASF FOS5HTASM, FCEFDTASH, FCNFDTASF, FOS7HTADS FOS5HTADS USER MANUAL...
- Page 3 2021150756 FOS5HTAEN 2021124375 Thank you for purchasing this Furrion® product. Before operating or installing, please read these instructions carefully. This instruction manual contains information for safe use, installation and maintenance of the product. Please keep this instruction manual in a safe place for future reference. This will ensure safe use and reduce the risk of injury.
- Page 4 CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..............4 Generic safety instructions ........................4 FCC Statement ............................6 IC Statement ..............................7 Care and Cleaning............................7 PRODUCT OVERVIEW ...................... 8 INSTALLATION AND CONNECTION ................11 Install the 5”/7” Monitor ...........................11 Install Doorway Security/Rear Camera ..................12 Install Side Cameras & Rear Camera with LED Marker Light ...........14 SYSTEM SETUP ........................
- Page 5 2. You are responsible for ensuring the installation of this product does not void or affect the vehicle manufacturer’s warranty. Furrion is not liable in full or in part for improper installation resulting in loss or damage to your property, or for voiding all or part of the vehicle manufacturer’s warranty.
- Page 6 (Limited Power Source) requirements or shall be a Power Source Class 2 (PS2) with less than 100W. Caution There are no serviceable parts in the Furrion® Vision S+ Camera System. Do not disassemble or attempt any repairs. Install external fuses/breakers as required.
- Page 7 Care Do not wash the vehicle with an automatic car wash or high pressure water. This may damage the camera. Clean the LCD screen with a microfiber cloth. Do not use coarse or abrasive materials. Do not use alcohol or ammonia based products to clean the LCD screen. Only use specialist screen cleaning products.
- Page 8 CAUTION: Never use solvents such as benzene, thinner or cleaners available commercially to clean the monitor. Furrion o ers you abundant options to set up an observation/security system for your vehicle. You can mount Furrion Vision S+...
- Page 9 Vehicle Observation System 7" FOS7HTAPM Furrion Vision S+® 4-Camera 7” System with LED Marker Lights Vehicle Observation System FOS7HTASF 7" Furrion Vision S+® Single 7” Camera System Vehicle Observation System 7" Furrion Vision S+® Single FOS7HTASM 7” Camera System with LED Marker Light Vehicle Observation System 5"...
- Page 10 Vehicle Observation System FOS5HTADS 5” Furrion Vision S+® 5” Monitor 5" / 7" Monitor Antenna Power/Menu Button USB-C Built-In LED indicator LCD Dimmer Sensor Micro-SD Card Ball-Joint (Silicon Cover) Speaker Heat Dissipation Doorway Security Camera Power/Menu Button 8 IR LEDs...
- Page 11 Side Camera with LED Marker Light Lens Marker Light 12 IR LEDs Light Sensor Pairing Button LED Indicator Rear Camera with LED Marker Light Antenna Marker Light Marker Light Lens Pairing Button LED Indicator 8 IR LEDs...
- Page 12 INSTALLATION AND CONNECTION Choose a mounting method. Install the 5"/7" Monitor When using the Windshield When mounted in the cab, the Furrion Mount: Clean the mounting area Vision S+ 7" monitor typically works as and remove the protective film from an observation system together with a the bottom of the suction cup.
- Page 13 12V/24V NOTE: The allowed input voltage to power source. the monitor is 5V, only use Furrion Always seek professional assistance if authorized cigarette adapter to you are unsure about the installation and connect the monitor, any other wiring operation.
- Page 14 #6 x ¾" flat head Self-tapping ⅝˝ Mount Camera If this camera comes in a bundle with a Furrion Vision S+ monitor, it is paired with the monitor by default. You can ⅝" connect the camera male connector 3. Connect the bare ends of the...
- Page 15 To avoid drilling new holes, it is recommended to replace the original marker lights with Furrion products directly as below: – For rear camera position: Locate the original rear marker light at the top center on the rear of your RV.
- Page 16 (Brown) (Red) NOTE: The RV shown here is for Right turn signal & Left turn signal & brake light brake light reference only. You can mount Furrion (Green) (Yellow) Vision S+ products onto various types Trailer brake control Ground (Blue)
- Page 17 SYSTEM SETUP Pair with a Camera If the monitor comes in a bundle with one or more Furrion Vision S+ camera(s), it is paired with the camera(s) by default. If you cannot see the video feed of the camera on the monitor screen or you have an unbundled camera, follow the procedures below to pair.
- Page 18 4. Click Camera Profile to enter the sub-menu. 5. In the case that you have purchased two or three sets of Furrion S+ system for different RV, you are allowed to set preferred profile for different RV. Click Change Profile to choose the profile that is right for the RV. Click on the top left of the monitor to return to the camera profile page for camera pairing procedures.
- Page 19 NOTE: You will receive a notification of “4 cameras are paired already! Please unpair a camera first.” if the profile was paired with 4 cameras already, you need to unpair at least one camera first before continuing the pairing procedures. See “UNPAIR WITH A CAMERA”...
- Page 20 view if no camera has been connected to both the doorway or rear position, or the sharkfin camera will be paired to the spare position (doorway/rear) automatically. 9. To check the pairing status of each camera, return to the Camera Pairing page or enter the Camera Status page, the icon indicating the camera is paired successfully.
- Page 21 Activate the Monitor When the monitor is off, press the Menu button on the right of the monitor to turn it on and enter the menu setting page. When the monitor is on, press and hold the Menu button to activate the menu setting page.
- Page 22 Split Screen Display Setting Tap the Split Screen icon to enter the sub-menu and select your preferred split- screen view mode. Quad Split or H Split camera layout for 4-channel display, Triple Split camera layout pattern for 3-channel display. IMPORTANT: Quad view mode is not recommended for observation while you are driving.
- Page 23 Video Recording Playback Click to choose to playback or delete the video recorded. Choose to clip the video in 1-min or 3-min length. Video Clip Length Record Preference Record Channel Turn on/off the video recording to the cameras. Camera Profile Setting Tap Camera Profile icon to skip to camera profile setting page.
- Page 24 System Setup Enable or disable screen brightness automatic adjustment Auto Dim function. LCD Auto Off Set the LCD auto off time. Display Change the setting of Motion Detect function. The monitor Settings will turn on automatically after any motion is detected while Motion Detect the monitor in off mode.
- Page 25 Icon Description Tap once, the icon will be changed to red indicating the device is recording a video. Tap the second time to cancel the recording. Tap to decrease the volume of the monitor. Tap to increase the volume of the monitor. Tap to mute the monitor.
- Page 26 LED) adapter and fuse box). Power off and on again to reset. Furrion monitor / rearview mirror can only pair with Furrion cameras. Pairing with products from other manufacturers is not supported. Check if the camera is receiving power.
- Page 27 Problem Solution Check if the camera antenna is fitted and secured correctly - it should be vertical. Large dense objects could be obscuring the signal. If possible, move the objects. Intermittent / weak signal Interference from electrical appliances may be affecting the wireless icon appears signal.
- Page 28 Memory Card Slot Micro SD up to 128G (at least Class 10 ) Recording Format AVI, H.265 Supply Voltage 5 ± 0.3VDC Working Current (Backlight On) <1500mA@5VDC Working Current (Backlight Off) <800mA@5VDC Wireless Frequency 2.4GHz Wireless Range <492 ft (150m) (open area) Delaying Time <250ms Type Approval...
- Page 29 52567 Independence Ct., Elkhart, IN 46514, USA Toll free:1-800-789-3341 Email: support@furrion.com ©2007-2022 Furrion Ltd. Furrion®, the Furrion logo and Furrion Vision S+® are registered trademarks licensed for use by Furrion Ltd. and registered in the U.S. and other countries. For Patent Info: www.furrion.com/pages/patents FURRION.COM...
Need help?
Do you have a question about the VISION S+ and is the answer not in the manual?
Questions and answers
I have installed a Furrion s camera & monitor for a rear view camera. I have successfully paired to profile 1. I get a response "no signal:. In the upper left corner it shows camera 4, I don't have a camera 4. How do I correct this so I am using camera 1? I checked the voltage at the camera and it registered 11.5 v. Help
what does it mean when camera is paired but not connected