NEC Express5800 Series User Manual page 82

Chapter 2 Preparations
Model Product
name
PCI card type *2
Transfer bandwidth
Available card size
N8104-146 InfiniBand Adapter (1ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8104-147 InfiniBand Adapter (2ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8118-01 PCI SSD Adapter (365GB)
( PCI Express 2.0(x4))
N8117-01A Additional RS-232C connector
*3
: Can be mounted, –: Cannot be mounted
*1 Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
*4 Performance of LAN depends on the application and memory capacity. If you want to mount three or more 10G LAN cards, a sufficient verification
under your system environment is needed.
*5 Change the "Above 4G decoding" setting to [Disabled] to use the PXE Boot function if you set Boot Mode to [Legacy].
82
Slot number #1A
PCI standard
PCI slot
performance *1
(per lane) *1
Slot size
For RAID
Controller
－
－
－
－
Express5800/R120g-1E User's Guide
Standard riser card
#1B #1D
PCIe 3.0
x8 lane
x8 socket
8Gb/s
Low profile
For LOM
card
220mm max.
－ ○
－ ○
－ ○
－ ○
1. Installing Internal Options
Remarks
For Infiniband connection
For Infiniband connection
SSD to be mounted to PCI slot
For additional serial port B (RS-232C)
Only one unit can be mounted at the
maximum.
(3/3)