Securam ProLogic L01-C Operating Instructions Manual page 19

ProLogic L01-C Operation Instructions
Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The "Select Menu" message will be displayed as follows:
Step 4: Scroll  to the menu selection "Cycle testing" and Press OK.
Step 5: The system will prompt you to enter the Manufacture Code. Enter 975246.
The system will now cycle the motor drive system, locking and unlocking the lock body every 1.5
seconds. The cycle testing will continue until the battery depletes itself of energy or power is
removed.
19