Securam ProLogic L01-C Operating Instructions Manual page 17

ProLogic L01-C
Step 4: The LCD screen will display an alpha-numeric number random key. Record this number
and call an authorized SecuRam Recovery Center or SecuRam Tech Support at 1-805-988-8088.
This code remains valid for a period of 20 minutes only.
Step 5: After receiving the One Time Use Recovery Code from the Recovery Center, press the
"back" button; and you will be prompted to enter your Recovery Code.
Step 6: Your system will now be restored and will display this message:
The Super Code will now be reset to 111111.
The Manager Code will now be reset to 123456.
7.3 Mechanical Reset
SecuRam Safe Locks can operate in either Analog mode or Digital mode. When they are paired with the
SafeLogic Series (EntryPads with no LCD screen or fingerprint reader) the safe lock operates in analog
mode.
When paired with a ProLogic Series (EntryPads with an LCD screen) or ScanLogic (EntryPads with a
fingerprint reader and/or LCD screen), the safe lock operates in digital mode.
The ProLogic L01-C is a digital system and can be paired with any SecuRam safe lock body.
Operation Instructions
17