Securam ProLogic L01-C Operating Instructions Manual page 16

ProLogic L01-C
Step 8: Next you will be prompted to enter your new 6 digit Recovery Code.
Step 9: Repeat the 6 digit Recovery Code.
The new Recovery Code has now been set. DO NOT lose this code. Without this code your
system cannot be recovered. After recovery, you can recover without using OTC for 20 minutes.
7.2 Recover System
In the event that you need to recover the system during its use, the following procedure is to be
followed.
System Recovery would be required in a number of circumstances such as:

All Managerial and User Codes have been lost or forgotten.

The system is unresponsive to commands and may need to be reset.
Step1: Press the Menu/OK button.
Step 2: Using the  and , scroll to the Recover System Menu and Press OK.
Step 3: The display will prompt you to enter the Recovery Code. Enter the existing Recovery
Code. The default recovery Code is 999999.
Operation Instructions
16