Dns - Fortinet FortiGate FortiGate-300 Administration Manual
Fortinet fortigate fortigate-300: user guide
Hide thumbs
Also See for FortiGate FortiGate-300:
- Installation manual (56 pages) ,
- Quick start manual (2 pages) ,
- Administration manual (458 pages)
Table of Contents
Advertisement
DNS
DNS
60
Figure 10: Management
Management
Enter the management IP address and netmask.
address for the network that you want to manage the FortiGate unit
IP/Netmask
from.
Default
Enter the default gateway address.
Gateway
Management
Select the virtual domain from which you want to perform system
management.
Virtual Domain
To configure the management interface
1
Go to System > Network > Management.
2
Enter the Management IP/Netmask.
3
Enter the Default Gateway.
4
Select the Management Virtual Domain.
5
Select Apply.
The FortiGate unit displays the following message:
Management IP address was changed. Click here to redirect.
6
Click on the message to connect to the new Management IP.
Several FortiGate functions, including Alert E-mail and URL blocking, use DNS. You
can add the IP addresses of the DNS servers to which your FortiGate unit can
connect. DNS server IP addresses are usually supplied by your ISP.
Figure 11: DNS
Primary DNS Server
Secondary DNS Server Enter the secondary DNS server IP address.
To add DNS server IP addresses
1
Go to System > Network > DNS.
Enter the primary DNS server IP address.
01-28006-0005-20041105
System network
This must be a valid IP
Fortinet Inc.
Advertisement
Table of Contents
