Connecting To A Power Supply - Hitachi LP-TW4001 User Manual

Connecting to a power supply

1.
Put the connector of the power cord into the
AC (AC inlet) of the projector.
2.
outlet. In a couple of seconds after the power
supply connection, the POWER/STATUS1
indicator will light up in steady orange.
Please remember that when the DIRECT POWER ON
function is activated, the connection of the power
supply makes the projector turn on. When the
AUTO POWER ON function is activated and the
projector is receiving an input signal, it is turned on by
connecting to the power supply.
WARNING
your dealer to get a new one. Never modify the power cord.
cord. The power outlet should be close to the projector and easily accessible.
Unplug the power cord for complete disconnection.
or other accidents.
of the building using an appropriate power cord (bundled).
NOTICE
This product is also designed for IT power systems with a phase-
to-phase voltage of 220 to 240 V.
Please use extra caution when connecting the power cord, as
AC
Power cord
9