Connecting With Your Devices - Hitachi LP-TW4001 User Manual

Connecting with your devices

Make sure that all the devices are suitable to be connected with this product, and
this manual.
1
website. ( )
COMPUTER IN of the INPUT menu, that port will accept component video signals.
computer's LAN port, or with an access point that is connected to the computer
with wireless LAN, using a LAN cable.
port and select the port as the input source, you can view images stored in the device.
USB TYPE B
you can use the USB TYPE B port as a picture input port from the computer, use
the remote control as a simple mouse and keyboard of the computer, or use the
WARNING
manufacturer. Consult your dealer when the required accessory did not come
with the product or the accessory is damaged. It may be regulated under some
standard.
projector. That may be required by EMI regulations.
- Neither disassemble nor modify the projector and the accessories.
accessories. Route a cable so that it is neither stepped on nor pinched out.
CAUTION
in operation, unless that is directed in the manual of the device.
the administrator of the network.
voltage.
use the wireless network function of this projector.
(continued on next page)
COMPUTER IN1 or COMPUTER IN2 port in
LAN port to any network that might have the excessive
F-3 to F-6 at the back of
LAN port with the
USB TYPE A
7