Replacing The Internal Clock Battery - Hitachi LP-TW4001 User Manual

Replacing the internal clock battery

Installing the battery is required in some cases. (
"Network Guide") A battery is not contained at the time of factory shipment.
Please replace a battery according to the following procedure.
Turn the projector off, and unplug the power cord.
1.
Turn the battery cover fully counterclockwise using a
2.
coin or the like, and pick the cover up to remove it.
3.
like to take it out. Do not use any metal tools. While
may pop out of the holder.
Replace the battery with a new MAXELL,
4.
Part No.CR2032 or CR2032H.
Slide the battery in under the plastic claw, and push
it into the holder until it clicks.
Replace the battery cover in place, then turn it
5.
clockwise
WARNING
And also improper use may result in cracking or leakage, which could result in
battery.
immediately for emergency treatment.
place.
If the leakage adheres to your body or clothes, rinse well with water immediately.
"Event Scheduling" in the
90°
90°
17