Removing The Stand (For Attaching The Bracket Wall) (C43J890Dk* / C43J892Dk*) - Samsung C43J890DK Series User Manual

Removing the Stand (For Attaching the BRACKET WALL) (C43J890DK* / C43J892DK*)

― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
1
Disassemble the COVER-CLEAN BACK STAND
with a thin stick, as shown in the figure.
5
Unfasten the 4 screws at the top of the stand
neck.
2
Disassemble the COVER-CLEAN BACK STAND.
6
Lift and remove the stand.
3
Remove the COVER-CLEAN BACK STAND.
Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
4
Remove the stand base from the stand neck.
23