Schwinn MPower Echelon2G Owner's Manual page 18

The menu maps shown below apply to firmware version 1.7 or later. If your console has an
older version of firmware, Schwinn recommends upgrading to the latest version of firmware.
The latest version can be downloaded from the Schwinn Support website at
https://support.corehandf.com/Software/
Instructions for updating firmware are shown below or can be viewed on Schwinn's YouTube video
at https://www.youtube.com/watch?v=7w2LlexQgAQ.
Top Level Service Menu
Default values are bold:
ON / OFF
• Carbon Blue:
• Units: MI / KM
ON / OFF
• Gear:
ON / OFF
• Open ANT:
• 3 Sec Avg: ON / OFF
• Backlight
(See menu below)
ON / OFF
• Calories:
• Passcode: ON / OFF
Select to set
• Sensor Type Echelon2 / 4iiii
(see
• Calibrate
(see menus below)
• Batteries
• System
(see menus below)
• Exit
Backlight Menu
Default values are bold:
• Timer Set: 10 / 15 / 20
ON / OFF
• Backlight Hold:
Page 18
Pairing, p. 20)
Passcode Screen if Set