Lenovo ThinkPad X1 User Manual page 29

3rd gen

Hide thumbs Also See for ThinkPad X1:

Table of Contents

This section provides the basic instructions on paring your computer with an NFC device. For more

information about data transfer, refer to the documentation of the NFC device.

Attention:

• Before handling the NFC card, touch a metal table or a grounded metal object. Otherwise the card might

get damaged by the static electricity from your body.

• During the data transfer, do not put your computer or NFC-enabled smartphone into sleep mode;

otherwise, your data could get damaged.

To pair your computer with an NFC card:

Before you start, ensure that the card is in NFC Data Exchange Format (NDEF), otherwise the card cannot be

detected.

1. Tap the card on the NFC touchpoint as shown.

2. Slowly move the card in the upright direction within a 10 mm (0.39 inches) distance. Then hold the card

for seconds until you are prompted that the card has been successfully detected.

Chapter 3

Using your computer

Table of Contents