Maintenance
9.2 Repair
9.2.1
Anti-condensation heating spare parts
Risk of explosion
If repairs to the anti-condensation heating are not carried out correctly, e.g. if unauthorized
or untested spare parts are used, this can result in explosions during operation in a potentially
explosive gaseous atmosphere. This can result in death, serious injury or material
damage.
Repairing and mounting the anti-condensation heating and the subsequent routine testing
must always be undertaken by experts from the Service Center, because this work requires
extensive specialist knowledge. Only authorized and tested spare parts may be used.
9.2.2
Insulated roller bearings
If roller-contact bearings with an insulated design are installed, use roller bearings of the same
type as spare parts. This will prevent any bearing damage being caused by bearing currents.
98
WARNING
LOHER CHEMSTAR 1PS5
Operating Instructions 03/2014