Epson Solar Series Instruction page 4

 Stopwatch hand position adjustment
If the stopwatch hands are not in the "0" position, follow the procedures below to set them.
(1) Pull the crown out to the 2nd click position.
- When the stopwatch is measuring, if the crown is pulled out to the 2nd click position, it will be automatically reset.
(2) Press the button A or B to set the stopwatch hands to the "0" position.
The movements of the stopwatch minute hand and the stopwatch second hand are interlocked. To set the
stopwatch minute hand to the "0" position, continue to move the stopwatch second hand until the
stopwatch minute hand reaches the "0" position.
- The stopwatch hands move quickly if the button A or B is kept pressed.
(3) Push the crown back to the normal position.
 Guidelines for battery indicator
• Press button B more than 1 second. The remaining battery capacity is indicated.
• Status indication is 2 seconds. Then it return automatically.
Battery level
High
Middle
Low
Display
Position : 45 seconds
Position : 40 seconds
Position : 35 seconds
Power reserve
90 days or more
30-90 days
30 days or less