Videonics PTM-1 User Manual page 22

Personal TitleMaker
Configuration 2
Use this configuration to display titles atop an incoming video signal,
but you cannot record the finished program to tape.
To make the connections for this configuration:
1 Locate the power supply unit in the Personal TitleMaker
package. Connect one end of the power supply unit to the
power jack on the Personal TitleMaker rear panel. Connect
the other end to a suitable wall outlet or power strip.
2
Connect one end of a suitable cable to the
input device. Connect the other end of the cable to either
the
COMPOSITE IN
Maker rear panel.
3 Connect one end of a suitable cable to the
video monitor. Connect the other end of the cable to either
the
COMPOSITE OUT
Maker rear panel.
14
3
1
or
or
– jack on the Personal Title-
S VIDEO IN
– jack on the Personal Title-
S VIDEO OUT
2
jack on the
OUT
jack on the
IN
User Guide