Videonics PTM-1 User Manual page 134

Personal TitleMaker
5
Now comes, perhaps, the tricky part.
Depending on how you set up the pages in your project, you
might have to start the input and output tapes rolling at the
same time, and also start the Personal TitleMaker project
running. You might need an extra set of hands to pull this
off.
If you set up your projects as explained in the tutorial (at the
beginning of this guide), you can first start the project, then
the recording device, then the input device without too
much trouble.
What you do from here on depends on how you have set up the pages
in the project. For example, if you set all pages for infinite duration, use
the key to switch from one page to the next: if you set all pages for
PLAY
timed duration and everything is properly timed, just sit back and let
everything run by itself. These procedures, and just about anything else
you can do to control the project are described in the preceding sec-
tions of this chapter.
126
User Guide