Tenda FH1201 User Manual page 29

PPPoE
Configuration Procedures:
①
Internet connection Type: Select PPPoE.
②
ISP Username: Enter the ISP login name.
③
ISP Password: Enter the ISP login password.
④
Click Save to save your settings.
Knowledge Center -----------------------------------------------------------------
1. MTU ： The MTU (maximum transmission unit)is the largest data packet a
network device transmits. The normal MTU value for most Ethernet networks is
1500 bytes,
or 1492 b yte s for PPPoE connections.
change the MTU. This is rarely required, and should not be done unless you are
sure it is necessary for your ISP connection. For more information, see WAN MTU
Setup.
2. Service Name: This is the descriptive na me of the current connection.
your ISP provides it.
High Power Wireless AC1200 Dual Band Router
For some ISPs, you might need to
24
Only enter it if