Connecting The Itview Dv To A Television - Focus iTView DV User Manual

Connecting the iTView DV to a Television

After installing the RGB cover and connecting the RGB cable to the
iMac DV, you will need to connect the iTView DV to a television or
VCR. This section describes the connections available and how to
use them. (If you are planning to connect to a VCR, see "Connecting
to a VCR" below.) There are three possible ways to connect to a
television:
Using a composite video connection
Using an S-Video connection
Using a SCART cable (Europe only)
Composite Video Connection
Composite video is a connection type used by most televisions,
VCRs, laserdisc players, and certain LCD panels. The connectors on
a composite video cable have an RCA-type plug. The plug has a long
metal pin projecting from its center and plugs into the composite
video in port at the rear of the television.
iTView DV User's Guide
Chapter 2 13