Raytech TR-MARK III 250V Instruction Manual page 5

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE:
Do not operate the instrument in the presence of flammable gases or fumes.
DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT:
Because of the danger of introducing additional hazards, do not install substitute parts or
perform any unauthorized modification to the instrument. Return the instrument to a Raytech
service department for service to ensure proper operation and that safety features are
maintained.
Instruments, which appear damaged or defective, should be made inoperative and secured
against unintended operation until they can be repaired by qualified service personnel.
DO NOT TOUCH TEST LEADS WHILE TEST VOLTAGE IS ON
Your TR-MARK III is equipped with 100V and 250V test voltage. These voltages can be
dangerous to humans, animals and equipment.
WARNING!
 Never touch test Leads of TR-MARK III while test voltage is on
90100-2.20 Instruction Manual TR-MARK III 250V
Check safety indicator on front panel.
Page 5 of 68