Commom Equipment Packaces; Stt - Lincoln Electric POWER WAVE STT Operator's Manual

POWER WAVE ®

STT

® MODULE (CE)
3
CASE FRONT DESCRIPTIONS
1. Status LED – Provides ArcLink
Note: During normal power-up, the LED will flash green up to 60 seconds as the equipment performs self tests.
LED condition Definition
Steady green. System okay. The power source and wire feeder are communicating normally.
Blinking green.
Occurs during a reset and indicates the power source is identifying each component in the system. This is
normal for the first 60 seconds after power-up, or if the system configuration is changed during operation.
Alternating green
Non-recoverable system fault. If the power source or wire feeder status LED is flashing any combination of red
. and green, errors are present in the system. Read the error code before the machine is turned off.
and red
2. STT INPUT – Connects directly to the Positive output of the power source.
3. STT OUTPUT – Connects directly to the wire feeder, torch or electrode.
COMMON EQUIPMENT PACKAGES
BASIC PACKAGE (CE)
K2921-1 STT ®
K2823-2 Power Wave
K14072-1
LF-45
K1543-xx
ArcLink
wire feeder to power source.
OPTIONAL WIRE FEEDERS
K2536
PF-25M
STT ® MODULE (CE) CASE FRONT
® status of Power Wave STT Module.
Module (CE)
® S350 (CE)
® Cable (5 pin) – connects
B-2
OPERATION
1
2