Advertisement
⑤ Unscrew 3 fixing bolts of lower knife by 4mm-wrench and take off lower knife.
⑥ Vice versa, install new lower knife and fasten it firmly.
⑦ Move up upper knife frame and install new upper knife and fix it but don't fasten it firmly.
⑧ By soft touch of M/CUT button, if right bottom of upper knife contacts top of lower knife,
screw the control bolt of upper knife slightly.
⑨ Make a cutting test with paper or tissue by M/CUT button(right, middle, left of knife
in order and adjust control bolt of upper knife finally.
⑩ If cutting is normal, fasten the control bolts of upper knife firmly.
⑪ Attach removed stopper again.
Mount of roll
Fix the roll triangle by 4mm-wrench.
Exchange of fuse
Take off the power plug and exchange as picture.
Cleaning of anti-static brush
If anti-static function becomes weak, clean the anti-static brush by other brush.
E-mail : cutex@chol.com
泰 友 精 密
TAEWOO CO., LTD.
ADDRESS : A-302, 1025-1 DOGOK-RI, WABU-EUP,
NAMYANGJOO, KYONGGI-DO, KOREA
TEL ＋82 31 521-6904～7
FAX ＋82 31 521-6908
E-mail : cutex@chol.com
www.cutex.kr
- 7 -
http://www.cutex.kr
Advertisement
