Advertisement
▷ Set function.(Sensor cutting: "1", Normal cutting : "0")
☞
Sensor cutting :
☞
Normal cutting :
▷ Locate the cutting line of label on the lower knife blade.
(This step must go ahead of sensor adjustment.)
▷ Sensor Adjustment
Light sensor-beam on sensing point of label.
(Refer to "How to use sensor R58 EXPERT of next page.)
▷ Press START button.
☞
START
※ Check Points for cutting trouble
- Check if you adjust sensor after locating cutting line of label on the knife blade.
- Move the sensor forwards or backwards.
- Check sensitivity & height of the sensor.
- Check if the switch is upside for elastic, downside for non-elastic including label.
E-mail : cutex@chol.com
1
FILE
EXTRA
⇒
⇒
0
FILE
LENGTH
⇒
⇒
CLEAR
- 2 -
S E T
S E T
http://www.cutex.kr
Advertisement
