Table of Contents User Manual ........................1 Preface ........................... 1 LED Indicators and Connectors ..................1 LED Indicators ....................1 Hardware Installation ..................2 Configuring Basic Settings ................... 2 Two-Level Management .................. 2 Accessing the User Interface Web Page ............2 Webpage ......................
dware Installation Configuring Basic Settings Two-Level Management “ ” “ ” Accessing the User Interface Web Page ’ ’ Notice: You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as the default IP address of the router, which is 192.168.11.1.
“ ” “ ” Webpage Navigation Click navigation bar, sub-navigation bars will appear on the second line. Click on the sub-navigation bars to Title choose a configuration page. Parameter To configure the parameters. After every change, click this button to apply the change.
3.5.1 Static IP IP Address Type the IP address. Subnet Mask Type the subnet mask. Gateway IP Type the gateway IP address. Address Primary DNS Type in the primary IP Server address for the route. Secondary Type in secondary IP address DNS Server for necessity in the future.
PPPoE Assign a specific valid user name Account provided by the ISP. PPPoE Assign a valid password provided by Password the ISP. Confirm Input the password again. Password Set the DNS Mode to Auto or Manual. DNS Mode If Manual, fill in primary and secondary DNS addresses.
3.6.2 Encryption Choose one SSID from SSID Off-premises 1, Choice off-premises 2 and Premises. Select an appropriate encryption mode for the security and privacy of your wireless data Security packets. Mode Each encryption mode will bring out a different page offer additional configurations.
Login ’ ’ Configuring the WAN and LAN Ports 4.2.1 LAN Local IP Type in local IP address Address (Default: 192.168.11.1) Type in an address code that Local Subnet determines the size of the Mask network. (Default: 255.255.255.0/ 24) Local DHCP If or not enable DHCP server.
Page 10
Local DHCP To enable DHCP server. Server Enter a value of the IP address pool DHCP for the DHCP server to start with Starting Address when issuing IP addresses. Enter a value of the IP address pool DHCP Ending for the DHCP server to end with when Address issuing IP addresses.
Time the specified PC. DNS Proxy If or not enable DNS proxy. 4.2.2 DMZ/Port Forward Enable DMZ DMZ Enable DMZ Host IP Enter the private IP address of Address the DMZ host 4.2.3 MAC Clone Step 1. Press to clone the current PC or MAC address to router’s Internet port.
Wireless 4.3.1 Basic Select Radio On to enable Radio the wireless, select Radio On/Off Off to disable wireless. Network Choose one network mode Mode from the five types. The name of the wireless. It can be any text numbers or various special characters.
Administration 4.5.1 Management User Type Select the user type New User User can change new Name user name Input the new password Password Confirm Confirm the password Password Enable NTP NTP Enable Current Time Display the current time. Select the time zone. NTP Settings Primary NTP The primary NTP server...
Need help?
Do you have a question about the WRT500 and is the answer not in the manual?
Questions and answers