ReadyNet AC1300MS Quick Installation Manual

2. Wireless Security Setup
Your router is pre-configured with wireless secu-
rity from the factory. The default wireless Pass
Phrase is printed on the sticker on the bottom of
the router. If you would like to change the fac-
tory set Pass Phrase, click 'Wireless 2.4GHz',
then 'Wireless Security'. The Pass Phrase must
have at least 8 characters. Click 'Save', then
click 'Wireless 5GHz' and 'Wireless Security' to
change the Pass Phrase for the 5GHz band. Once
your new Pass Phrase has been entered, click
'Save', then click 'Reboot' to apply your changes.
IMPORTANT: Click the 'Reboot' button at the
bottom of the page to save your settings.
Figure 3
Wireless AC Router
D. Setting Up Your Wireless Devices
Your wireless devices (desktop, laptop, iPad, smart-
Your AC1300MS has been pre-configured with an SSID
phone, etc.) must be configured to work with your
(wireless network name) and security pass phrase.
wireless router. Each of these devices must have
See the sticker on the bottom of your router for this
an internal or external wireless adapter and applica-
information. If you wish to change these or other
ble drivers. User guides for each of these devices
should have instructions for wireless set up. You settings, use the following instructions.
will need the SSID and password you assigned to
this wireless router during router set up. For each
wireless device, access the setup menu, choose the
appropriate SSID from the list of wireless net-
works, enter your password, and test the wireless www.readynetsolutions.com
connection.
E. Telephone Service
Quick Installation Guide
Contact your service provider to provision your
voice service on this device.