Axis BD/S series User Manual page 9

_____________________________________________________________________________________________________________________
 Displaying a inscription on scale's display (text communicate from computer):
ComputerScale: SN n n X X X X X X CR LF, nn-displaying time in seconds; XXXXXX-6 signs to
display
ScaleComputer: MN CR LF (4Dh 4Eh 0Dh 0Ah),
 Scale tarring (calling
ComputerScale: ST CR LF (53h 54h 0Dh 0Ah),
ScaleComputer: without response,
 Scale zeroing (calling
Computer Scale: SZ CR LF (53h 5Ah 0Dh 0Ah),
Scale Computer: without response,
 Scale turning on / off (calling I/ key press):
Computer Scale: SS CR LF (53h 53h 0Dh 0Ah),
Scale Computer: without response,
 Entering to special function menu (calling MENU key press):
Computer Scale: SF CR LF (53h 46h 0Dh 0Ah),
Scale Computer: without response,
 Setting threshold 1 value (option):
Computer Scale: SL D1...DN CR LF (53h 4Ch D1...DN 0Dh 0Ah)
D1...DN – threshold value, maximum 8 characters („-" – negative value, digits, dot – decimal
separator), number of digits after dot should be the same as on scale display,
Scale Computer: without response,
Example:
 in order to set low threshold 1000g in scale B1.5 (d=0.5g) the following order should be sent:
S L 1 0 0 0 . 0 CR LF (53h 4Ch 31h 30h 30h 30h 2Eh 30h 0Dh 0Ah),
 in order to set low threshold 100kg in scale B150 (d=50g) the following order should be sent:
S L 1 0 0 . 0 0 CR LF (53h 4Ch 31h 30h 30h 2Eh 30h 30h 0Dh 0Ah),),
 Setting threshold 2 value (option):
Computer Scale: SH D1...DN CR LF (53h 48h D1...DN 0Dh 0Ah),
D1...DN – threshold value, maximum 8 characters
Scale Computer: without response.
 Setting threshold 3 value (option):
KomputerWaga: SM D1...DN CR LF (53h 4Dh D1...DN 0Dh 0Ah),
gdzie: D1...DN – threshold value, maximum 8 characters
WagaKomputer: without response.
Connecting cable WK-1 (scale – computer / 9-pin interface):
USER MANUAL
 
T key press) :
 
0 key press):
SCALE
`
COMPUTER
9