Network Installation (Lan, Wifi) - AVM OVATION MP 6.2 Operating Instructions Manual

1.9 Network installation (LAN, WiFi)

In order to use the integrated streaming functions (e.g. TIDAL, Airable, Webradio, Musik-
Server etc.) your MP 6.2 needs to be connected to the internet via a router in your home
network. You can choose from a wired ethernet connection (LAN) (31) or a wireless WiFi
connection (28).
In order to use the WiFi connection of the MP 6.2, the included WiFi antenna needs to be
installed (28). Please follow the instructions below to connect your MP 6.2 to your local home
network.
1.9.1 Network installation: Wired ethernet connection (LAN)
ü Please switch off the MP 6.2 on the rear side of the unit (35).
ü Plug an ethernet cable from your local router into the network port of the MP 6.2 (31).
ü Switch on the MP 6.2 on the rear side of the unit (35). Wait until the device has started
and went into stand by mode. Now, switch it on with the power button on the front side
(1).
ü After a brief starting process your MP 6.2 automatically connects to your local home
network and is ready to be operated via
1.9.2 Network installation: Wireless connection (WiFi)
In order to set up the MP 6.2 with a wireless connection, you need to download and install
the free RC S App for iOS and Android
CAUTION: Before using the wireless functionality of the MP 6.2 an initial set-up of a wired
ethernet connection (LAN) according to the steps described in section 1.9.1 is required.
ü Please switch off the MP 6.2 on the rear side of the unit (35).
ü Plug an ethernet cable from your local router into the network port of the MP 6.2 (31).
ü Switch on the MP 6.2 on the rear side of the unit (35). Wait until the device has started
and went into stand by mode. Now, switch it on with the power button on the front side
(1).
ü After a brief starting process your MP 6.2 automatically connects to your local home
network and is ready to be operated via the
ü Launch the RC S App on your smartphone or tablet. The RC S App will now automatically
search and list all available AVM devices in your local network with their respective device
name and IP adress (e.g. "192.168.xxx.x" or "10.0.1.4").
RC S App for iOS and Android.
or the optionally available RC 9 remote control.
RC S App for iOS and Android.
9