Table of Contents
Advertisement
1.5 Connection to a preamplifier or integrated amplifier
Connect the analogue outputs (16-19) to the high-level inputs of a preamplifier or integrated
amplifier. The RCA-cinch outputs and the balanced XLR outputs are fully decoupled from
each other and can be used independently.
1.6 Connection of digital signal sources
Digital signal sources
Connect the outputs of your digital sources to the corresponding inputs of the MP 6.2:
- Optical inputs (23,24)
- Coaxial inputs (25,26)
- USB B input (22)
- AES/EBU input (27)
Digital input sources
The input of a digital recorder must be connected to the digital outputs (20, 21). The signal on
the digital outputs depends on the selected source (e.g. DIG COAX, DIG OPT).
1.7 RC 9 remote control
The optionally available RC 9 remote control allows for easy and comprehensive control of
the MP 6.2. Before you can use the RC 9 together with your MP 6.2, both components need
to be connected. This process is also referred to as Pairing. In order to start the pairing
process, please follow the instructions as described in section 4.7.5. For a detailed
description of functions and features of the optionally available RC 9 remote control, please
refer to chapter 4.
1.8 RC S App for iOS and Android
The RC S App for iOS and Android will turn your smartphone or tablet into an easy-to-use
remote control and provides a variety of intuitive features to get the most out of your network-
enabled AVM device. The RC S App is available free of charge and can be downloaded from
the
Apple App Store
and the
Google Play
Store. For detailed instructions on how to set-up
your AVM device with the RC S App, please refer to the RC S User Guide which can be
downloaded from our website at www.avm.audio.
8
Advertisement
Table of Contents
