Table of Contents
Advertisement
PROG
In case of a currently active track programming both the currently playing track and the total
number of programmed tracks is displayed on the left-hand side (for example "PROG 2/17").
RND
In case the random play mode is activated, the currently playing track and the total number of
programmed tracks are displayed on the left-hand side (for example "RND 5/12").
2.3.2
Display in D/A converter mode
On the left-hand side the name of the currently selected input is displayed. If there is no
incoming signal available at the currently selected input, NO DIG SIGNAL or NO USB
PLUGGED is shown right next to the input name.
2.4 CD Player
2.4.1
Playable disc formats
Your Media Player can play back all compact discs which are recorded according to the red
book standard (means the standards for audio CDs established by Philips and Sony).
Furthermore all CDRs and CDR/Ws with good reflection recorded according to this standard
are playable. Most copy protected discs are also playable. But we cannot take responsibility
that all future copy protection systems are playable.
2.4.2
Insert / eject
Insert a CD
Your Media Player is provided with a slot-in CD drive (8). Insert the CD (coverside up) and
push slightly. The drive will now automatically draw the disc inside. After that the player reads
the TOC (table of contents) and shows it on the display. Most left is the number of the actual
track followed by the total number of tracks on the CD (for example "1/17"). The middle of the
display shows the total playing time of the CD.
NOTE: If there is still a CD inside or the unit is in stand by, the slot will be blocked. If the
inserted disc is not readable (DVD, data-CD) the display will show NO AUDIODISC.
Eject CD
Press the EJECT button (15). Then the disc will be ejected. If no CD is inserted, the display
shows NO DISC.
AUTO PLAY
If CD is not selected as source the unit will automatically change to CD from any other input
as soon as a CD is inserted. If AUTO PLAY is activated (see 0), the CD player will start
playing automatically every time a CD is inserted. If AUTO PLAY is deactivated, the CD
player will read the TOC (table fo contents) of the inserted disc and then go to STOP mode.
14
Advertisement
Table of Contents
