Entry Of Letters, Numbers, And Characters; Hotkeys; System Settings - AVM OVATION MP 6.2 Operating Instructions Manual

Hide thumbs Also See for OVATION MP 6.2:

Table of Contents

4.5 Entry of letters, numbers, and characters

To enter letters, numbers, or characters, please use the alphanumeric input keys (25) which

have multiple letters, numbers, or characters assigned. By pressing one of the keys several

times, switches through the row of available letters, numbers, or characters.

The left navigation key (11) is used to delete entered characters and numbers. The right

navigation key (11) is used to instert a blank character. The blue option key (5) is used to

toggle between upper and lower case characters. For special characters please press the

"1"key of the Alphanumeric input keys (25) repeatedly.

The four hotkeys (4) offer direct access to a total of four devices of a currently active zone. All

four devices can be directly accessed from the lower part of the footer section. For details

and an explanation of the term "zone" please refer to section 4.7.2.

To access the System Settings menu please press the Settings key (9). The following menu

points can be selected via the four Navigation keys (11) and the Enter key (10): Device

Selection, Change Zone, System Information, User Settings, Start Pairing.

4.7.1

Device selection

Under the menu Device Selection you can find all available and recently paired devices with

their respective names. Wih the navigation keys (11) please choose one of the devices from

the list and confirm with the Enter key (10). The menu point Device Selection is also shown

when the RC 9 remote control is waking up from stand by mode and hasn't already been

connected with a device.

NOTE: Please note that only one device can be controlled by the RC 9 remote control at a

time. If you happen to choose another device, the connection to the formerly linked device

will be interrupted.

4.7.2

Change zone

If you have multiple devices which can be controlled with the RC 9 remote control, you can

group those devices into several zones such as different rooms or appliance combinations.

The "Change Zone" option allows you to switch between different zones and is also available

via the Zone menu (7). Each zone is provided with four assignable Hotkeys (4) for a direct

access to its four associated devices (see 4.7.4 and 4.6).

Table of Contents