Activation And Stand By Mode; Battery Charge; Colour Display - AVM OVATION MP 6.2 Operating Instructions Manual

Hide thumbs Also See for OVATION MP 6.2:

Table of Contents

4.2 Activation and stand by mode

To switch on a connected device (see Pairing 4.7.5), please pick up your RC 9 remote

control which automatically switches on due to the integrated movement sensor. Then,

please choose one of the connected devices from the list and press the Enter button (10).

Notes on the optional quick start function can be found in section 4.9.

In order to charge the included lithium-ion battery of your RC 9 remote control, please

connect the power supply unit with the USB cable. On the other end, please connect the

USB charging cable optionally with the RC 9 remote control or with the supplied docking

station. The charge starts automatically, as soon as the power supply unit is connected to the

power supply system and if necessary, the RC 9 remote control is placed in the charging

cradle of the docking station.

NOTE: Due to the included motion sensor of the RC 9 remote control, the device may be

unintentioanally activated during transportation. For this reason, the RC 9 is delivered with a

fully discharged battery. In view of a long lifecycle of the lithium-ion battery, we recommend

fully charging the battery before using it for the first time. Please follow the above mentioned

instructions and do not interrupt the charging procedure until the status bar in the upper right

corner of the display indicates a fully charged battery.

Battery is fully charged, remote control is connected to the charger, charging completed

Battery is almost fully charged, remote control is connected to the charger

Battery is empty, remote control is not connected to the charger

The colour display divided into three sections in any operating mode:

Header section: In the header section the current control area is shown (e.g. source,

system, internet radio etc.). On the right-hand side is the charging status of the integrated

lithium-ion battery (for an explanation of the charging status symbols please refer to the

section above.

Content section: The content section is the central user interface of your RC 9 remote

control where both menu points of the currently accessed control area and graphical user

elements are being shown.

Footer section: In the upper part of the footer section you can both find the actual time

and informatin on the current connection statuss. The lower part of the footer section is

divided into four parts which can be assigned with so-called Hotkeys (please refer to

sections 4.6 and 4.7.4 for detailed information on Hotkeys).

Table of Contents