Selecting Or Changing The Ars Mode - Motorola APX MOBILE O3 CONTROL HEAD User Manual

• ARS Server Mode (default mode)
• ARS Non-Server Mode
Note:
The default ARS mode can be changed by a
qualified radio technician using the radio's
programming software.

Selecting or Changing the ARS Mode

The following methods are options on how to select
or change the ARS Mode. The result of all the
methods is the same. You can use the options
interchangeably depending on your preference and
the programmed functions.
• Selecting or Changing the ARS mode via the radio
menu:
a) Press and hold
b) Press the Menu Select button directly below
Chan.
The display shows the current zone is not
blinking, and the channel is blinking.
c)
or
rotate the Mode Rocker to the desired
channel.
One of the following scenarios occur:
78
English
or to Chan.
or press the Mode Rocker once and
• In ARS Server Mode, the display shows the
User Login Indicator icon, the zone, and
ARS server channel.
• In ARS Non-Server Mode, the display
shows the User Login Indicator icon, the
zone, and ARS non-server channel.
• If the channel or mode selected is
unprogrammed, the display shows
Unprogrammed. Repeat this step.
d) Press
to confirm the displayed zone and
channel.
• Selecting the ARS mode via the Mode Rocker:
a) After the zone you want is displayed, toggle
until the display shows the required channel.
The display shows the current zone is not
blinking, and the channel is blinking.
b)
or or press the Mode Rocker once and
rotate the Mode Rocker to the desired
channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the
User Login Indicator icon, the zone, and
ARS server channel.