Table of Contents
Advertisement
•
For ASTRO Conventional system, the LED
lights up solid red. The display shows the
talkgroup alias or ID.
•
For Trunking system, the LED lights up solid
red.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.
Making a Private Call (Trunking Only)
Your radio must be preprogrammed to allow you to
use this feature.
This feature allows you to send an individual Call
Alert or page if there is no answer from the target
radio. See
Sending a Call Alert Page
more information.
1 Perform one of the following actions:
•
To access this feature via a preprogrammed
button, press the preprogrammed Quick
Access (One-Touch) Private Call button to
dial the preprogrammed ID (number) and
initiate the Private Call. Proceed to step 5.
2
3 To select the required ID, perform one of the
on page 72 for
4 Press the PTT button to initiate the Private Call.
5 Hold the microphone vertically 1 to 2 inches (2.5 to
•
To access this feature via the menu, proceed
to the next step.
or
to Call, and press the Menu Select
button directly below Call.
The display shows the last transmitted or received
ID.
following actions:
•
Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
•
Press the Menu Select button directly below
List to go to the first number of the call list.
•
or
to the required ID.
•
Use the keypad to enter the required ID.
A telephone-type ringing sounds if the receiving
unit is in service. The display shows Calling...
<Number> or Calling... <Alias>.
5.0 cm) from your mouth.
51
English
Advertisement
Table of Contents
