Table of Contents
Advertisement
General Radio Operation
Selecting a Zone
Your radio must be preprogrammed to allow you to
use this feature.
A zone is a group of channels.
Select a zone via the radio menu Zone:
a)
or
to Zone and press the Menu Select
button directly below Zone.
b)
or
to the required zone, or use the keypad
to enter the zone number.
c) Press
or the PTT button to confirm the
selected zone number.
d) Press the PTT button to transmit on the
displayed zone channel.
Selecting a Radio Channel
A channel is a group of radio characteristics, such as
transmit/ receive frequency pairs. The following
methods are options on how to select a radio
channel. The result of all the methods is the same.
You can use the options interchangeably depending
on your preference and the programmed functions.
•
Select a channel via the Mode Rocker Up or
Down:
a) Press the Mode Rocker Up or Down.
b) Press
or the PTT button to confirm the
channel.
c) Press the PTT button to transmit on the
displayed zone channel.
•
Select a channel via the radio menu Chan:
a)
or
to Chan.
b) Press the Menu Select button directly below
Chan.
c)
or
to the required channel.
d) Press the Menu Select button directly below
Sel to confirm the selected channel.
e) Press the PTT button to transmit on the
displayed zone channel.
45
English
Advertisement
Table of Contents
