Note:
If the user has disabled TX Inhibit via the
softkey and then moves the switch to the
position where TX Inhibit is enabled, the
new value overwrites the menu value.
The display shows Tx inhibit off. You hear a
sequence of short, high‐low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal
operation.
General Radio Information
Your radio contains information on the following:
•
Radio Information
•
IP Display
•
Control Assignments
Note:
The radio automatically exits the feature, if the
feature inactivity timer is enabled, when the
radio is left idle and the timer expires. You
hear the Menu Inactive Exit Tone upon feature
exit.
Accessing the Radio Information
This feature displays the following radio information:
•
Host Version
•
Secure Version
•
CH 1 – 4 Version (depending on the number of
channels connected.)
•
Siren Version
•
Model Number
•
ESN
•
Flash Code
•
Tuning Version
•
DSP Version
•
KG (Secure Algorithm)
•
Serial Number
•
Flash Size & Type
•
RF Band(s)
•
Processor Version
•
MCHIB Version
•
CHIB Version
•
TIB Version
•
TRC Version
•
VRS Version
•
URC Version
•
DVRS App Version (only when DVRS is available)
•
DVRS DSP Version (only when DVRS is
available)
131
English