Function; Main Specifications Of Auto-Cutter - Citizen CL-S521 User Manual

1.

Function

The auto-cutter units are designed to cut various media such as labels, tickets
and tags precisely and accurately as the setting cut length.
2.

Main specifications of auto-cutter

Cutting method:
„
Maximum cut paper thickness: 0.25 mm (0.01")
„
Minimum cut paper length:
„
Cut paper width:
„
Durability:
„
Number of cuts:
z Media with adhesive substance may be excluded from the number of cuts.
Note
z The number of cuts can vary according to the quality of the paper.
Media and paper types:
„
Roll or label (continuous, die-cut, fanfold, tag and ticket).
However, the following paper cannot be used:
Paper with thickness of 0.06 mm (0.0024") or less
z
Roll paper with paper core diameter of 50 mm (2") or less
z
Using paper other than the specified types may cause problems such as
Note
paper jams, so the paper specification must be checked before use.
Cut accuracy:
„
Cut length tolerance: ±1.0 mm or less
z
Left and right cut tolerance: ±1.0 mm or less
z
Cutting position can be adjusted using
Note
printer commands (see page 12).
When using adhesive media, dot not cut
z
labels itself. Adjust the printer to cut the
liner only. If label glue sticks to the cutter
blades, irregular cutting will occur.
Guillotine cutter
25.4 mm (1")
Maximum: 118 mm (4.65")
Minimum: 25.4 mm (1")
Minimum 300,000 times
(for a paper thickness of 60 to less than 150 µm)
Minimum 100,000 times
(for a paper thickness of 150 to 250 µm)
CAUTION
-6-
Direction of paper feed