Performance Loss; Battery Will Not Hold Charge - Mercury 40 CT Maintenance And Installation Manual

Table of Contents

Advertisement

c. Stuck antisiphon valve located on permanently built‑in type fuel tanks.
d. Fuel line is kinked or pinched.
Fuel pump failure.
Ignition system component failure.
Fuel injection component failure (EFI models).

Performance Loss

POSSIBLE CAUSES
Engine Guardian System activated. Refer to Features and Controls ‑
Warning System.
Throttle not fully open.
Damaged or improper size propeller.
Incorrect engine timing, adjustments, or setup.
Boat overloaded or load improperly distributed.
Excessive water in bilge.
Boat bottom is dirty or damaged.

Battery Will Not Hold Charge

POSSIBLE CAUSES
Battery connections are loose or corroded.
Low electrolyte level in battery.
Worn out or inefficient battery.
Excessive use of electrical accessories.
Defective rectifier, alternator, or voltage regulator.
eng
TROUBLESHOOTING
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

60 ct40 seapro60 seapro

Table of Contents