Toro 74253 Operator's Manual page 29

1. Disengage the PTO, move the motion control levers
to the neutral locked position, and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Grease the idler pulley pivot (Figure 29).
4. Grease the fittings on the 3 spindle bearings
(Figure 29).
5. Grease the pump belt idler arm (Figure 30).
6. Grease the PTO drive belt idler arm (Figure 31).
Figure 29
Figure 30
29
Figure 31