Table of Contents
Advertisement
15
Mechanical stitch length limitation
.06.16
Rule
1. The feed dog must not strike against the needle plate cutout when sewing forwards
and backwards at max. stitch length.
2. The screws of the stops 1 (forward sewing) and 3 (reverse sewing) should each have a
clearance of 0.3 mm to the corresponding cast edge.
Fig. 15 - 16
O Turn on the machine and adjust parameter 849 according to rule 1, see chapter 15.11 Pa-
rameter settings.
O Select the maximum stitch via the control panel.
3.5
O Turn the stop 1 ( screw 2 ) according to rule 2.
O Sew stitches with the key for reverse sewing 2 pressed, see chapter 7.02 Keys on the
machine head.
O Turn the stop 3 ( screw 4 ) according to rule 2.
O Switch the machine off.
2
1
Adjustment
3
4
23
Advertisement
Table of Contents
