Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha 2008 WR250R Owner's Manual

Tail/brake light

This model is equipped with an
LED-type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24181
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Turn signal light lens
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24202
1. Turn signal light bulb
2
1
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
6-35
1
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
2
3
4
5
6
ECA11190
7
8
9