Removing And Installing Panels - Yamaha TT-R110E Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
7
1. Panel A
EAU18773
1
1. Panel B
Panel A
To remove the panel
1. Remove the seat. (See page 4-8.)
2. Remove the bolts and the quick
fastener screws, and then take the
panel off.
1
1. Panel A
2. Bolt
3. Quick fastener screw
EAU56170
To install the panel
1. Place the panel in the original po-
2. Install the seat.
Panel B
To remove the panel
1. Remove the seat. (See page 4-8.)
2. Remove the bolt, and then pull the
7-7
2
3
sition, and then install the bolts
and the quick fastener screws.
panel off as shown.
3
1