Procedure For Tilting Down - Yamaha F115 Owner's Manual

Operation
UP
1. Power trim and tilt switch
UP
1. Power trim and tilt switch
1. Power trim and tilt switch
3. Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and tilt
unit or in the power tilt unit loses pres-
74
1
ZMU07850
1
ZMU08096
NOTICE: Do not use the
sure.
[EWM00263]
tilt support lever or knob when traile-
ring the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be
trailered in the normal running posi-
tion, use an additional support device
to secure it in the tilt position. For
more detailed information, see page
77.
[ECM01642]
1. Tilt support lever
EMU42702

Procedure for tilting down

1. Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2. Release the tilt support lever.
1. Tilt support lever
1
ZMU08097
1
ZMU08099
"