Replacing A Headlight Bulb - Yamaha 2005 MT-01 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Replacing a headlight bulb

1. Low beam headlight bulb
2. High beam headlight bulb
This model is equipped with quartz bulb
headlights. If a headlight bulb burns
6
out, replace it as follows.
To replace a headlight bulb
1. Remove the headlight unit by re-
moving the bolts on each side.
EAU36820
1. Bolt
To replace the high beam head-
light bulb
a. Remove the headlight bulb
holder cover by turning it coun-
terclockwise.
1. Headlight bulb cover
6-26
b. Disconnect the headlight cou-
pler, and then unhook the
headlight bulb holder.
1. Headlight coupler
2. Headlight bulb holder
c. Remove the defective bulb.
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
d. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
EWA10790