Synology Diskstation At A Glance - Synology DiskStation DS216+II Quick Installation Manual

Synology DiskStation at a Glance

No. Article Name
1 Status Indicator
2
LAN Indicator
3 Disk Indicator
4
USB 3.0 Port
5 Copy Button
6 Power Button
7 Fan
8 USB 2.0 Ports
9 RESET Button
10 LAN Port
11 eSATA Port
12
Power Port
Kensington
13
Security Slot
4 Chapter 1: Before You Start
Location
Displays the status of the system. For more information, see "Appendix B: LED
Indicator Table".
Displays the status of the network connection. For more information, see
"Appendix B: LED Indicator Table".
Displays the status of the installed drives. For more information, see "Appendix B:
LED Indicator Table".
Connect external drives, USB printers, or other USB devices to the DiskStation
Front Panel
here.
Lights up when you connect a USB device (e.g. digital camera, USB storage
device, etc.). Press the copy button to copy data from the connected USB device
to internal drives.
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound and
the Power LED starts blinking.
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
Connect external drives, USB printers, or other USB devices to the DiskStation
here.
1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and passwords for the admin account.
2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the DiskStation to "Not installed" status
Back Panel
so that DiskStation Manager (DSM) can be reinstalled.
Connect a network cable here.
Connect external SATA drives here.
Connect the AC adapter here.
Attach a Kensington security lock here.
Description