Panasonic CS-XZ7SKEW Service Manual page 133

19.1.2 To Remove Electronic Controller
5. Remove earth wires.
8. Remove screw to remove
terminal board complete.
CN-NANO
CN-DATA2
Figure 5
7. Detach CN-DISP and CN-RCV
connectors from indicator complete.
Figure 3
CN-DATA1
Figure 2
9. Pull out the
10. Detach all connectors as labelled from the
electronic
controller halfway.
6. Detach lead wires
ACN501 (Grey),
ACN502 (White),
AC302 (Yellow),
ACL501 (Brown)
and AC304 (Red)
from the terminal
board.
133
3 Hooks (Top, left
and right hand side)
4. Remove control board
cover by releasing 3 hooks.
electronic controller. Then pull out the
electronic controller gently.
CN-TH
Figure 4
CAUTION
During assembly of PCB,
tie connector CN-303 (WHT)
together with the PCB.
AC303 (WHT)
CN-FM
CN-STM1
CN-STM2
CN-STM3
CN-MSENS