Fisher & Paykel OR48DDPWGX1 Installation Instructions Manual page 14

2
PRESSURE REGULATOR INSTALLATION
STEP 1
Mount the 1/2" NPT (conical) male connector to the pressure
regulator and tighten by using a wrench.
LOCK
Do not over tighten the connector.
Over tightening may crack regulator.
Arrow
Fig. 2.2a
STEP 2
Assemble the 1/2" NPT connector + pressure regulator group to the extension pipe interposing the gasket supplied. The
regulator cover must be ordiented toward the front side of the range.
IMPORTANT: use two spanners to tighten the connection.
Regulator cover
Fig. 2.2b
14